Plastic steel tile is mainly made of high-quality PVC resin as the base material, adding UV ultraviolet absorbent, antioxidant, modifier, etc., to ensure the service life of the product. Even after long-term exposure to harsh natural environment, it can still maintain its stability and ensure the long-term safe use of the product. Reasonable installation of plastic steel tile is conducive to prolong the service life of plastic steel tile, reduce the engineering risk and improve the use effect. Therefore, the installation of plastic steel tile process can not be ignored, the following small series for you to introduce plastic steel tile installation precautions, for your reference!

1. During installation, it is not suitable to cover the insulation materials directly.

2. When installing the plastic steel tile, the electric drill shall be used to drill the hole first, and then the hook nail shall be used to fix the tile. The screw cap on the fastening hook screw shall be moderately tight and not too tight.

3. In order to ensure personal safety, ladders or other qualified facilities should be used in construction, and it is not allowed to step between two purlins during installation.

4. When cutting, fine tooth saw should be used. If the hole is drilled wrong, adhesive can be used to solve the problem.

5. If the temperature is below - 5 ℃ and wet weather such as rain and snow, it is not suitable for installation.

6. It is required that each type of tile shall be constructed in strict accordance with the required purlin spacing.

7. During the construction, attention should be paid to the fixing of tiles. Two sets of accessories should be evenly installed on each purlin and each tile, and the accessories must be fixed on the wave crest.

8. When installing the tile hook, the special rubber pad should be used under the tile, and the nut should be moderately tight and not too tight